Cast-iron angle shutoff valve working as inlet valves and outlet valves for large size pressure tanks or vessel in fluids system
Car Auto Hand Held Vacuum Pump Tester Set and Pump Brake Bleeder Adaptors Fluid Reservoir Tester Kit 2 in 1 Diagnostic Tool Kits
Car Brake Fluid Tester with 5 LED Indicators for DOT 3/4/5
Liquid Receivers with 1-1/8 valve are suitable for use with industrial fluids non-corrosive to steel, copper and Teflon
Pressure Relief V alves are suitable for use with ndustrial fluids non- corrosive to brass, steel and Teflon
Liquid Fluid Water Level Controller / Float Switch - Blue + Yellow
2 in 1 brake bleaker and vacuum pump tester tool kit brake fluid replacement hand-held vacuum pistol pump tester
Mrs Dalloway's Party
Senior Intravenous Fluids Leg Model Venous Transfusion Leg BIX-HS16 WBW046
Stylish Fluid-filled Compass
MODiSSA Royal Jelly Beauty Fluid Toner Lotion Essence 3 in 1 Face Beauty Fluid Promotes Blood Circulation Moisturizing Skin Care
Professional 801 Aluminum 12cm tripod fluid head with built-in counterbalance system 8kg payload for dslr camera shooting
New Portable Battery Acid Antifreeze Fluid Glycol Refractometer degree F + Built-in ATC + Calibration Knob
SIRUI R4214X Professional Carbon Fiber Tripod with VH15 Fluid Head
yieryi Hand Held Tester Tool 4 In 1 Engine Fluid Glycol Antifreeze Freezing Point Car Battery Refractometer W ATC With The box
Stay safe and know that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.
Developed for professional use in automotive repair shops and servicing. Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode. The high moisture content will lead to a lower boiling point, affect braking performance.
Accuracy and Science OrientedBrake fluid detection pen is based on the change in conductivity to determine the moisture change of brake fluid.
Multiple UtilizationTesting DOT 3, DOT 4, DOT 5 brake fluid, only takes seconds to know the results.
Clear Indication5 LEDs to indicate percentage of water in the brake fluid.
Safe and Environmentally FriendlyThe tester will automatically power off after about 15 seconds of inactivity.
How to UseUnscrew the brake fluid reservoir, and pull off the cap of the brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.
Green: Battery OK (no water contained in the brake fluid).
Yellow: Less than 1% of water content in brake fluid.
Yellow/Yellow: Approx. 2% of water content in brake fluid.
Yellow/Yellow/Red: Approx. 3% of water content in brake fluid (time to change the brake fluid).
Yellow/Yellow/Red/Red: Approx. 4% of water content in brake fluid (change the brake fluid immediately).
Car Brake Fluid Tester
Car Brake Fluid Tester
1 x 1.5V AAA Battery (Battery not Included)
According to conductivity changes to determine moisture change in brake fluid, with five different color LED indicator
15 x 2.3 x 2.0 (cm)
1 x Car Brake Fluid Tester, 1 x User Manual